F.N. Sheppard & Co. | Belting specialist
F.N. Sheppard & Co. | Belting specialist
All Categories > Timing Belts > Belt Coverings > Item # PVC  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # PVC





Belt Covering and Flexibility Graph Directions
  1. Measure outside pulley diameters and note the size on the bottom of the graph.
  2. Select belt backing material thickness on the left of the graph and note what group it is in (A, B or C).
  3. Determine the maximum recommended thickness for the material at the pulley diameter.
  4. If a greater thickness is required than what is recommended, we can machine or cut stress relieving slots as necessary to allow for better flexibility.






Specifications

Flexibility

B

Covering Description

Typically this material is molded directly to a PVC base belt structure. Good resistance to oils fats and plasticizers.

Temperature Range

-4 to 176 ºF

Color

Various Colors

Hardness

40 to 70 Duro.

Note

Additional coverings can be applied virtually to any base belt. Contact our Technical Department for further information.

FDA Approved

No

Oil Resistance

Good

Abrasion Resistance

Good


 MORE IMAGES 

·  Timing Belt (Urethane)

·  Timing Belt (Neoprene)

·  Poly-V Belt (Neoprene)

·  HTD® Belt (Neoprene)

·  Flat Belt Base Belt

·  V Belt (Neoprene)


 DOWNLOADS 

Belt Covering
(PDF, 257KB)

Cover Hardness Graph
(PDF, 53KB)

Belt Covering Flexibility Chart
(PDF, 293KB)