F.N. Sheppard & Co. | Belting specialist
F.N. Sheppard & Co. | Belting specialist
All Categories > Timing Pulleys and Other Products > item-1078  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Clamping Plates



F. N. Sheppard tooth profile clamping plates allow maximum clamping strength for open ended timing belts used in oscillating or linear drives. Our precision machined tooth prevents slippage or backlash.




Aluminum Plate Dimensions - XL, L, H  · Aluminum Plate Dimensions - T5, AT5, T10, AT10, T20, AT20  · Aluminum Plate Dimensions - HTD® 5M, 8M, 14M

Aluminum Plate Dimensions - XL, L, H
PITCH F
inches
D
inches
B
inches
A
inches
S
inches
Belt Width C (inches)
025 037 050 075 100 150 200 300 400
XL 0.24 0.22 0.14 1.67 0.31 1.00 1.12 1.26 1.50 1.77 - - - -
L 0.31 0.35 0.20 3.02 0.59 - 1.41 1.54 1.77 2.03 2.52 3.03 - -
H 0.39 0.43 0.35 4.21 0.87 - - 1.77 2.00 2.26 2.75 3.26 4.25 5.27




Aluminum Plate Dimensions - T5, AT5, T10, AT10, T20, AT20
PITCH F
mm
D
mm
B
mm
A
mm
S
mm
Belt Width C (inches)
10 16 25 32 50 55 75 85 100
T5, AT5 6.00 5.50 3.20 41.80 8.00 29 35 44 51 71 - - - -
T10, AT10 8.00 9.00 5.00 80.00 15.00 - 41 50 57 75 - 100 - 125
T20, AT20 10.00 11.00 10.00 160.00 20.00 - - 56 65 81 106 132 - -




Aluminum Plate Dimensions - HTD® 5M, 8M, 14M
PITCH
HTD®
F
mm
D
mm
B
mm
A
mm
S
mm
Belt Width C (inches)
10 15 20 25 30 40 50 55 85 100
5M 6.00 5.50 3.20 41.80 8.00 28 34 - 44 - - 61 - - -
8M 8.00 9.00 5.00 66.00 15.00 35 40 45 - 55 - 75 - 110 125
14M 10.00 11.00 9.00 116.00 22.00 - - - 56 - 71 - 86 116 132